Category Archives: Structural Engineering

Property Condition Assessment and Energy Audit

Leave a reply

Adding an Energy Audit or Energy Benchmarking to a Property Condition Assessment (PCA) can put dollars in your pocket.  A PCA gives you an indication of the current and future costs of building maintenance, but you could be missing out on many cost-savings measures. 

Energy Benchmarking is a cost-effective first step to understanding and reducing your energy consumption and carbon footprint.  Benchmarking studies a building’s current energy usage and helps determine achievable and cost-effective energy reduction goals. 

An Energy Audit is a comprehensive look at how a building consumes energy along with recommendations to reduce energy use (via no/low cost measures or capital intensive measures), costs to implement, projected cost savings and payback period.  While an Energy Audit is a more involved process and can vary in the level of detail (ASHRAE Levels 1, 2 and 3), the potential returns on investment are significant.

A building purchaser would be interested to know, for example, if a lighting system upgrade could result in a 34% internal rate of return.  Well, that’s just what one of Partner Energy’s audits uncovered.  A combination of new high-efficiency lighting and motion sensors (at a total cost of approximately $44,000) resulted in an annual energy cost savings of $14,700 and a relatively short payback period (less than 3 years).  At an 8% cap rate, the building value increased by $183,000 (over 4 times the installation cost) – certainly a sound investment!  And that did not account for potential rent increases, increases in absorption and decreases in vacancy for Green Labeled buildings.

By reducing operating expenses and increasing building value, an Energy Audit and its recommended energy efficiency measures can help building owners and purchasers achieve their energy efficiency and capital investment goals.

ALTA Survey

Leave a reply

The acronym “ALTA” stands for American Land Title Association. Specifications of this type of Survey include (but are not limited to) determining improvements, location of property lines, utilities, identifying all easements and other conditions affecting the property. ALTA surveys are very comprehensive surveys and can typically cost thousands of dollars and can take several weeks to complete. All ALTA Land Survey must meet the “Minimum Standard Detail Requirements for ALTA/ACSM Land Title Surveys” as adopted by the American Land Title Association, the American Congress on Surveying and Mapping, and the National Society of Professional Surveyors. The Alta Survey is most often performed on commercial properties.

Property Condition Assessment

Leave a reply

When investing in commercial buildings, real estate investors are need a high quality commercial building inspection, often called a Property Condition Assessments.  

When asked to do a Commercial Building Inspection, I start by trying to understand the client’s goals.  Are they ordering the report for a lender?   Do they want a 100% detailed inspection or a walk through?   Has the seller made any significant disclosures?  Are there other stakeholders such as equity sources or partner who need to understand the condition of the building?  Once I understand the goals I propose the appropriate level of diligences, which can range from a walk-through inspection by a senior building inspector to a team of engineers and specialist digging into every aspect of the building.

Either way, the Property Condition Assessment Report which includes a discussion of the following building systems:

–          Structure;

–          Building Envelope;

–     Roof;

–         HVAC Equipment

–          Mechanical, Electrical, and Plumbing;

–         Paving, Drainage, Landscaping;

–          Fire Suppression and Security Systems;

–          Elevators;

–          ADA Compliance.

A PCA report typically includes two important tables: an Immediate Repairs Table; and a Replacement Reserves Table.   The Immediate Repairs Table is a schedule of all failing or worn out systems requiring attention in the next 90 days.   The Replacement Reserve table will typically estimate the building’s capital replacement schedule for the next twelve years.  

When I dispatch a team of engineers and building systems specialists, I call the report a Property Condition Evaluation.  These reports typically range between $5,000 and $25,000 and are appropriate for large complex assets.   The most common specialist to add is that of a structural engineer.  The structural engineer will produce a structural report or a Probable Maximum Loss Report, when in seismic zone 3 or 4.  

Other specialists that add great value are an HVAC specialist, an elevator specialist and a roof specialist.  The specialist typically produces reports that are ultimately included in the appendix of the master PCE report. 

The specialist does thing that are beyond the scope of our building inspectors.  For example, the HVAC specialist will turn on the air conditioning system in the dead of winter.  The specialist opens up the systems being inspected and collects parametric data.  The result of the more detailed inspection is a very detailed report with specialty reports in the appendices.  Partner Engineering’s project manager and field inspector is almost always a registered engineer or very senior building inspector. 

Our Property Condition Evaluations save the client significant money in most engagements.  Often clients are able to negotiate price reduction or other consideration that is 10 times our fee.  Our work typically pays for itself!